SURTECO offers the widest range of Hot Melt Adhesives available for Edgebanding.
Format: Cartridges
Packaging: 45 Cartridges (15 kg/case)
Colors: Natural or White
Format: Pellets / Granular
Packaging: 25 kg Bag
Colors: Natural or White
Format: Pellets / Granular
Packaging: 25 kg Bag
Colors: Natural, White
Format: Pellets / Granular
Packaging: 25 kg Bag
Colors: Natural, White, Black
Format: Pellets / Granular
Packaging: 25 kg Bag
Colors: Natural
Format: Pellets / Granular
Packaging: 16 x 750 g Bags
Colors: Natural or White
Cleaner to Use: Cleaner 4
SDS: Natural White
Format: Slugs
Packaging: 8 x 2 kg Bags
Colors: Natural or White
Cleaner to Use: Cleaner 2
SDS: Natural White
Format: Cartridges
Packaging: 6 x 1.6 kg Cartridges
Colors: White
Cleaner to Use: Cleaner 2
SDS: White
Format: Cartridges
Packaging: 6 x 1.6 kg Cartridges
Colors: Natural
Cleaner to Use: Cleaner 2
SDS: Natural
Format: Cartridge
Packaging: 8 /Case – 1.8 lb
Tint: Blue
Use for: PUR 270/7 G
Format: Granular
Packaging: 16 bags /Case – 26.5 lb
Tint: Blue
Use for: PUR 270/7 G
KS 207 – Low viscosity EVA based hotmelt adhesive for automatic straightline Edgebanding equipment. This economy glue is recommended for PVC, ABS, Veneer, Polyester, HPL and Melamine Edgebanding materials.
KS 208/2 – Medium viscosity EVA based hotmelt adhesive for automatic straightline Edgebanding equipment. This general glue is recommended for PVC, ABS, Veneer, Polyester and Melamine Edgebanding materials.
KS 217 – Low viscosity EVA hotmelt recommended for automatic straightline equipment. It is recommended for medium to fast machine speeds. Recommended for use in granular feed or quick step hotmelt systems. Suitable for all listed Edgebanding materials.
KS 205 – Filled EVA hotmelt with high viscosity for medium machine speeds suitable for automatic Edgebanders.
KS 217- Low viscosity EVA hotmelt recommended for automatic straightline equipment. It is recommended for medium to fast machine speeds. Recommended for use in granular feed or quick step hotmelt systems. Suitable for all listed Edgebanding materials..
KS 351 – Medium viscosity EVA hotmelt for automatic edgebanders, softforming equipment and automatic processing centers (BAZ). Unfilled adhesives insures minimal glue lines and are perfectly suited for contour applications. Higher yield than filled adhesives.
HKP 20 – Premium unfilled cartridge adhesives. Particularly suitable for solid wood.
HKP 21 – Standard grade multi-purpose cartridge adhesives.
HKP 25 – Premium grade multi-purpose cartridge adhesive. Also suitable for HPL Edgebanding.
HKP 27 / HKP 29 – PUR adhesive that created the ultimate waterproof and heat resistant bond.
HKP 27 / HKP 29 – PUR hotmelt recommended for universal use. Suitable for automatic edgebanders and softforming edgebanders. 150 °C heat resistance.
KS 270/7 – Filled EVA hotmelt with low viscosity particularly suitable for nozzle application. 150 °C heat resistance.
KS 300 – Medium viscosity PolyOlefin hotmelt for softforming equipment. Permits smooth surfaces even with very flexible edging materials. Good cold flexibility. 120 °C heat resistance.
KS 224/2 – Low viscosity EVA hotmelt recommended for manual operated edgebanders. Adhesive can be applied directly on the Edgebanding. Not suitable for HPL Edgebanding.
KS 224/2 – Low viscosity EVA hotmelt recommended for manual operated edgebanders. Adhesive can be applied directly on the Edgebanding. Not suitable for HPL Edgebanding.
KS 351 – Medium viscosity EVA hotmelt for automatic edgebanders, softforming equipment and automatic processing centers (BAZ). Unfilled adhesives insures minimal glue lines and are perfectly suited for contour applications. Higher yield than filled adhesives.
KS 201/4 – EVA hotmelt with high viscosity and high heat resistance for fast machine speeds for Edgebanding and softforming. It is suitable for all listed Edgebanding materials.
KS 351 – Medium viscosity EVA hotmelt for automatic edgebanders, softforming equipment and automatic processing centers (BAZ). Unfilled adhesives insures minimal glue lines and are perfectly suited for contour applications. Higher yield than filled adhesives.
KS 230 – Medium viscosity EVA hotmelt for automatic edgebanders, softforming equipment and automatic processing centers (BAZ). Slightly filled adhesive which provides a high glue mileage.
PUR 270/7 Reactive Polyurethane (PUR) hotmelt with high initial bonding strength. Chemical cross-linking within a few days insures permanent bond. This adhesive provides high heat and water resistance. PUR adhesives are unfilled producing tight joints. Should be filled directly into the glue pot not into the pre-melter. Cleaner 2 is required and should be used before shift end to remove all PUR residue from the glue pot and glue application roller. Reduction of temperature to 80ºC is recommended if adhesive is not used consistently throughout the day.
ND 183/1 A sprayable, waterborne and solvent free synthetic primer that improves difficult to bond woods (solid wood and wood veneer strips) and laminates. It is not suitable for PVC and ABS Edgebanding.
KS 205 – Filled EVA hotmelt with high viscosity for medium machine speeds suitable for automatic Edgebanders.
ND 183/1 A sprayable, waterborne and solvent free synthetic primer that improves difficult to bond woods (solid wood and wood veneer strips) and laminates. It is not suitable for PVC and ABS Edgebanding.
KS 205 – Filled EVA hotmelt with high viscosity for medium machine speeds suitable for automatic Edgebanders.
KS 217- Low viscosity EVA hotmelt recommended for automatic straightline equipment. It is recommended for medium to fast machine speeds. Recommended for use in granular feed or quick step hotmelt systems. Suitable for all listed Edgebanding materials..
KS 351 – Medium viscosity EVA hotmelt for automatic edgebanders, softforming equipment and automatic processing centers (BAZ). Unfilled adhesives insures minimal glue lines and are perfectly suited for contour applications. Higher yield than filled adhesives.
| Product | Technology | Viscosity | Softening Point | Heat Resistance | Glue Pot Temperature | Minimum Feedrate (m/min) |
|---|---|---|---|---|---|---|
|
HKP 20 |
EVA, Unfilled |
75,000 |
110° C |
90 °C |
190 °C – 200 °C |
10 |
|
HKP 21 |
EVA, Filled |
87,500 |
108° C |
90 °C |
190 °C – 200 °C |
10 |
|
HKP 25 |
EVA, Filled |
55,000 |
108° C |
90° C |
190 °C – 200 °C |
10 |
|
HKP 27 |
PUR |
50,000 |
75 ° |
150 °C |
150 °C – 160 °C |
10 |
|
HKP 29 |
PUR |
40,000 |
80 °C |
150 °C |
150 °C – 160 °C |
10 |
|
KS 201/4 |
EVA, Filled |
150,000 |
148 °C |
110 °C |
210 °C – 220 °C |
18 |
|
KS 205 |
EVA, Filled |
155,000 |
120 °C |
90 °C |
200 °C – 220 °C |
15 |
|
KS 207 |
EVA, Filled |
55,000 |
95 °C |
85 °C |
180 °C – 200 °C |
20 |
|
KS 208/2 |
EVA, Filled |
100,000 |
110 °C |
90 °C |
180 °C – 200 °C |
15 |
|
KS 217 |
EVA, Filled |
55,000 |
105 °C |
90° C |
180 °C – 200 °C |
12 |
|
KS 224/2 |
EVA, Filled |
10,000 |
85 °C |
75 °C |
120 °C – 140 °C |
10 |
|
KS 230/1 |
EVA, Slightly Filled |
70,000 |
125 °C |
90 °C |
180 °C – 200 °C |
15 |
|
KS 270/7 |
PUR |
45,000 |
80 °C |
150 °C |
120 °C – 140 °C |
10 |
|
KS 300 |
Polyolefin |
95,000 |
155 °C |
120 °C |
180 °C – 200 °C |
20 |
|
KS 351 |
EVA, Unfilled |
70,000 |
110 °C |
90 °C |
180 °C – 200 °C |
12 |
Contact SURTECO to request technical support, receive a quote or order samples.
